An administrator plans to deploy ESXi 5.x, but does not want to use CD or DVD media. What are two alternate ways to provide the ESXi 5.x installation script to the host? (Choose two.)

An administrator plans to deploy ESXi 5.x, but does not want to use CD or DVD media.
What are two alternate ways to provide the ESXi 5.x installation script to the host? (Choose two.) 

A. PXE
B. FTP
C. HTTP
D. IPMI







Answer: B,C

An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation in a system that is running ESXi 5.x. The administrator has downloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMwareSupported. Which driver acceptance levels would prohibit it from being included in the image? (Choose two.)

An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation in a system that is running ESXi 5.x. The administrator has downloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMwareSupported.
Which driver acceptance levels would prohibit it from being included in the image? (Choose two.)

A. PartnerSupported
B. VMwareAccepted
C. CommunitySupported
D. VMwareCertified







Answer: A,C

An administrator plans to deploy ESXi 5.x on a blade server containing no local disks. What boot options are supported for use in place of local disks? (Choose three.)

An administrator plans to deploy ESXi 5.x on a blade server containing no local disks.
What boot options are supported for use in place of local disks? (Choose three.)

A. An SD card
B. A NIC with iBFT
C. Auto Deploy
D. A server with IPMI or iLO
E. A dedicated NFS share







Answer: A,B,C

An administrator is setting up vSphere Auto Deploy to deploy 25 ESXi hosts using the vCenter Server Appliance (VCSA). What would be considered best practices for Auto Deploy? (Choose three.)

An administrator is setting up vSphere Auto Deploy to deploy 25 ESXi hosts using the vCenter Server Appliance (VCSA).
What would be considered best practices for Auto Deploy? (Choose three.) 

A. Enable vSphere
H. on the cluster.
B. Protect the vCenter server with Fault Tolerance.
C. Install the Auto Deploy service on the VCSA.
D. Include the vmware-fdm VIB in the image profile.
E. Use PowerCLI to write a rule that assigns a custom image profile to the target hosts.







Answer: A,D,E

An administrator is deploying several ESXi 5.x hosts. Centralized logging with accurate timestamps is a requirement for the deployment. Which two operations ensure these requirements are met? (Choose two.)

An administrator is deploying several ESXi 5.x hosts. Centralized logging with accurate timestamps is a requirement for the deployment.
Which two operations ensure these requirements are met? (Choose two.) 

A. Ensure TCP port 123 is not blocked
B. Configure a syslog server on each host
C. Ensure the hosts have the proper timezone configured
D. Configure a syslog server on the vSphere Management Appliance









Answer: A,D

How can vCenter maps be used outside of the vSphere client? (Choose two.)

How can vCenter maps be used outside of the vSphere client? (Choose two.) 

A. Saved to a Visio .vsd file
B. Sent to a printer
C. Exported as a jpg
D. Saved as a PDF








Answer: B,C

What options must be configured in the vCenter Server settings before email alerts can be sent? (Choose two.)

What options must be configured in the vCenter Server settings before email alerts can be sent? (Choose two.) 

A. Sender email address
B. SNMP address information
C. SMTP server information
D. Email authentication information






Answer: A,C

Which two actions can be scheduled through the Scheduled Task wizard in the vSphere Client? (Choose two.)

Which two actions can be scheduled through the Scheduled Task wizard in the vSphere Client? (Choose two.) 

A. Remove a host.
B. Change the VM power state.
C. Create a virtual machine.
D. Revert to a snapshot of a virtual machine.





Answer: B,C

Which functions can be performed with the Plug-in Manager? (Choose two.)

Which functions can be performed with the Plug-in Manager? (Choose two.) 

A. Enable an installed plug-in
B. Remove permissions for a plug-in
C. View the status of installed plug-ins
D. Uninstall a plug-in






Answer: A,C

Which two vCenter plug-ins are installed with a default vSphere Client installation? (Choose two.)

Which two vCenter plug-ins are installed with a default vSphere Client installation? (Choose two.) 

A. vCenter Hardware Status
B. VMware ESXi Service Status
C. VMware vSphere Update Manager
D. VMware vCenter Storage Monitoring Service






Answer: A,D

What are two valid use cases for vCenter Server Linked Mode? (Choose two.)

What are two valid use cases for vCenter Server Linked Mode? (Choose two.) 

A. An administrator wants to migrate running virtual machines between vCenter Server instances.
B. An administrator wants to increase the vRAM entitlement pool.
C. An administrator wants to manage a virtual server environment and a View environment from the same pane of glass.
D. An administrator wants to search all inventory objects across multiple vCenter Server Appliance instances from one vSphere Client.







Answer: B,C

What are two prerequisites for installing the vCenter Server application? (Choose two.)

What are two prerequisites for installing the vCenter Server application? (Choose two.) 

A. The system vCenter Server is installed on must be a physical machine.
B. A valid vSphere vCenter license must be obtained before installation.
C. vCenter must be in the same network as the hosts if supporting vSphere Storage Appliance Cluster.
D. The system vCenter Server is installed on cannot be a domain controller.







Answer: C,D

Multiple users need to be able to access a physical desktop that has specialized software. All data needed by the users is stored on a network share. What must the administrator do so that the users can access the physical desktop in a View environment?

Multiple users need to be able to access a physical desktop that has specialized software. All data needed by the users is stored on a network share.
What must the administrator do so that the users can access the physical desktop in a View environment? 

A. A dedicated-assignment automatic pool must be created.
B. A floating-assignment manual pool that includes only this desktop must be created.
C. An automatic pool with manual-assignment of names must be created.
D. A Terminal Services pool that includes the desktop must be created.







Answer: B

What are three reasons for deploying vCenter Server on a physical machine? (Choose three.)

What are three reasons for deploying vCenter Server on a physical machine? (Choose three.) 

A. vCenter Server can be deployed on a physical machine to support a VSA configuration.
B. vCenter Server can be deployed on a physical machine to ensure it is not susceptible to vSphere outages.
C. vCenter Server can be deployed on a physical machine to improve VMware Data Recovery performance.
D. vCenter Server can be deployed on a physical machine to improve vMotion performance.
E. vCenter Server can be deployed on a physical machine to ensure it does not contend for resources.








Answer: A,B,E

Which three services/features will continue to function when vCenter Server is unavailable? (Choose three.)

Which three services/features will continue to function when vCenter Server is unavailable? (Choose three.) 

A. Storage DRS
B. Fault Tolerance (FT)
C. vMotion
D. Thin Provisioning
E. High Availability







Answer: B,D,E

Which two modules are required prior to installation of vCenter Server? (Choose two.)

Which two modules are required prior to installation of vCenter Server? (Choose two.) 

A. VMware vCenter Single Sign On
B. VMware vCenter License Server
C. VMware Inventory Service
D. VMware vCenter Host Update Utility







Answer: A,C

Which two settings are required by the deployment wizard when installing the VMware vCenter Server Appliance? (Choose two.)

Which two settings are required by the deployment wizard when installing the VMware vCenter Server Appliance? (Choose two.) 

A. Number of CPUs
B. Datastore to install on
C. Linked-mode
D. Name of the vCenter server







Answer: B,D

Which three options are available for client certificate checking? (Choose three.)

Which three options are available for client certificate checking? (Choose three.)

A. Disable certificate checking
B. Mandatory certificate checking
C. Prompt user to accept/ignore common certificate errors
D. Prompt user to override certificate checking
E. Strict certificate checking








Answer: A,B,C

What are two reasons for implementing Persona Management? (Choose two.)

What are two reasons for implementing Persona Management? (Choose two.) 

A. Deduplication of user settings
B. More efficient use of storage space
C. Move users from dedicated to floating desktops
D. Provide faster login times







Answer: C,D

Which three PCoIP optimizations can used to reduce bandwidth on both the LAN and WAN? (Choose three.)

Which three PCoIP optimizations can used to reduce bandwidth on both the LAN and WAN? (Choose three.) 

A. Lossless Codec
B. Session MTU size
C. Client side caching
D. Build to lossless GPO
E. Multi-media compression GPO






Answer: A,C,D

A View administrator has received a request for a new desktop pool for users who travel frequently. The desktop pool has been configured for View local mode. Which two View local mode policies can be enabled to control synchronization with the View Transfer Server? (Choose two.)

A View administrator has received a request for a new desktop pool for users who travel frequently. The desktop pool has been configured for View local mode.
Which two View local mode policies can be enabled to control synchronization with the View Transfer Server? (Choose two.) 

A. Local Mode synchronization frequency
B. Disk synchronization frequency
C. User initiated check-ins
D. Target replication frequency






Answer: C,D

A customer provides a list of requirements for the virtual desktop environment for consideration during a pre-implementation discussion. Which three customer requirements will be satisfied by the View Connection Server in its role as a connection broker? (Choose three.)

A customer provides a list of requirements for the virtual desktop environment for consideration during a pre-implementation discussion.
Which three customer requirements will be satisfied by the View Connection Server in its role as a connection broker? (Choose three.) 

A. User authentication
B. Desktop provisioning
C. Connection negotiation between the client and the virtual desktop
D. Desktop assignment, if available
E. USB redirection






Answer: A,C,D

When users are logging into your non-persistent desktop pool they are seeing previous users in C:\users\. What two processes could be implemented to remediate this? (Choose two.)

When users are logging into your non-persistent desktop pool they are seeing previous users in
C:\users\.
What two processes could be implemented to remediate this? (Choose two.) 

A. Disable Cache Local Persona at logoff group policy.
B. Disable Store Local Persona in pool settings.
C. Enable Remove Local Persona at Logoff group policy.
D. Enable Refresh Pool at Logoff in pool settings.






Answer: C,D

An administrator needs to re-install the VMware Security Server several months after initial deployment, but the installation is failing. Which two are likely causes of the problem? (Choose two.)

An administrator needs to re-install the VMware Security Server several months after initial deployment, but the installation is failing.
Which two are likely causes of the problem? (Choose two.) 

A. The ports 4001 and 8009 are not open in the firewall between the Security and Connection Servers.
B. The Windows Firewall on both the View Connection Server and the View Security Server is enabled.
C. The time allotted for the Pairing Password on the View Connection Server has expired.
D. The password being entered does not conform to the complex security requirements enforced by Active Directory.






Answer: A,C

A new Connection Server has been added to the View environment. View administrators and clients cannot connect to that new Connection Server. However, connectivity to the pre-existing Connection Servers remains active. Which two configurations should be verified to diagnose the problem? (Choose two.)

A new Connection Server has been added to the View environment. View administrators and clients cannot connect to that new Connection Server. However, connectivity to the pre-existing Connection Servers remains active.
Which two configurations should be verified to diagnose the problem? (Choose two.) 

A. The View Connection Server services are running on the newly added Connection Server.
B. The IP address for the new Connection Server has not changed on the server or within DNS.
C. The Security Server associated with the Connection Server is running.
D. The vCenter Server system associated with the Connection Server is running.






Answer: A,B

A desktop administrator creates a manual pool and determines that one of the unmanaged desktops does not appear in the list of machines that can be added. How can the desktop administrator verify that the desktop is registered?

A desktop administrator creates a manual pool and determines that one of the unmanaged desktops does not appear in the list of machines that can be added.
How can the desktop administrator verify that the desktop is registered? 

A. Review the list of desktops in View Administrator.
B. Review registration events in the events database.
C. Review the Registered Desktop Sources page in View Administrator.
D. Review the list of pools in View Administrator.








Answer: C

A View administrator is creating a new automated pool for a group of 1,000 users. The pool provisioning process fails, and an error message displays:

A View administrator is creating a new automated pool for a group of 1,000 users. The pool provisioning process fails, and an error message displays: 

A. Port 18443 is open on the View Connection Server firewall.
B. There are no network problems between the View Connection Server and vCenter Server.
C. The View Connection Service is running on the View Connection Server.
D. The Web service is running on the vCenter Server system.







Answer: B,D

A system administrator has installed the initial instance of the Standard Connection Server. Connection to the vCenter Server fails during initial configuration. Which three configurations should the administrator verify to diagnose the failure? (Choose three.)

A system administrator has installed the initial instance of the Standard Connection Server. Connection to the vCenter Server fails during initial configuration.
Which three configurations should the administrator verify to diagnose the failure? (Choose three.) 

A. The ADAM Instance on the Connection Server can connect to the SQL Server database used by vCenter Server.
B. The username of the vCenter Server user has proper permissions within vCenter Server.
C. The system hosting vCenter Server has an active network connection.
D. Both the vCenter Server and Connection server are in the same Active Directory domain.
E. The FQDN of the vCenter Server can be resolved from the Connection Server.








Answer: B,C,E

The accounting department of an organization is replacing their Windows XP desktops with new PCoIP enabled thin clients connecting to a VMware View environment containing a pool of Windows 7 virtual desktops. Part of the new deployment included creating a new Active Directory Organizational Unit named Accounting VDI and adding all of the accounting users into that Organization Unit. Validating the configuration has shown that connectivity from the thin clients to the desktop pool using the RDP protocol is not working. However, connectivity using PCoIP works appropriately. What are three possible causes of the issue? (Choose three.)

The accounting department of an organization is replacing their Windows XP desktops with new PCoIP enabled thin clients connecting to a VMware View environment containing a pool of Windows 7 virtual desktops. Part of the new deployment included creating a new Active Directory Organizational Unit named Accounting VDI and adding all of the accounting users into that Organization Unit. Validating the configuration has shown that connectivity from the thin clients to the desktop pool using the RDP protocol is not working. However, connectivity using PCoIP works appropriately.
What are three possible causes of the issue? (Choose three.) 

A. The View administrator has disabled the RDP protocol on the View Connection Server.
B. The Accounting VDI group is not a member of the Remote Desktop Users Organization Unit.
C. RDP was not enabled on the base Windows 7 template.
D. The Active Directory group has not been enabled to use Windows 7.
E. The Accounting VDI group in Active Directory is not a member of the Remote Desktop Users group.








Answer: A,C,E

The View Desktops are not performing well across your WAN link. The administrator looks at the overall traffic on the link and notices it is not saturated and that VoIP and other protocols are performing well. Which two configuration settings should the administrator verify or change to increase the performance for PCoIP? (Choose two.)

The View Desktops are not performing well across your WAN link. The administrator looks at the overall traffic on the link and notices it is not saturated and that VoIP and other protocols are performing well.
Which two configuration settings should the administrator verify or change to increase the performance for PCoIP? (Choose two.) 

A. Verify your MTU setting and QOS setting align to provide the optimal data flow and packet size for your PCoIP sessions.
B. Verify the QOS settings to ensure PCoIP to have 50 percent of the available bandwidth and it is set to the highest priority.
C. Verify the QOS settings to ensure PCOIP has 80 percent of the available bandwidth after removing the required bandwidth for VoIP.
D. Verify that you are allowing PCoIP to burst when network bandwidth is available.







Answer: C,D

An organization has two vCenter Server managed environments in a large datacenter:

An organization has two vCenter Server managed environments in a large datacenter: 

A. View Transfer Servers must be managed by the vCenter Server instance that the View Manager is connected to.
B. Datastores that are not shared between the environments make it impossible to process desktop images with the Transfer Server.
C. The default settings for a Windows Server 2008 R2 virtual machine do not include the second virtual disk needed to process desktop images.
D. The default settings for a Windows Server 2008 R2 virtual machine do not include a supported disk controller for the View Transfer Server.







Answer: A,D

An administrator attempts to create a custom role for additional administrators of a View 5.x environment, but finds they cannot modify administrator permissions. Attempting to troubleshoot the problem, the administrator tries to run vdmadmin, but finds they are unable to do so. Which two statements explain the issue the administrator is experiencing? (Choose two.)

An administrator attempts to create a custom role for additional administrators of a View 5.x environment, but finds they cannot modify administrator permissions. Attempting to troubleshoot the problem, the administrator tries to run vdmadmin, but finds they are unable to do so.
Which two statements explain the issue the administrator is experiencing? (Choose two.) 

A. The administrator's role is not assigned to the root folder.
B. The administrator does not have the Console Interaction privilege.
C. The administrator does not have the Manage Roles and Permissions privilege.
D. The administrator does not have the Manage Global Configuration and Policies privilege.








Answer: A,C

Why must an unmanaged desktop be registered with View Connection Server before it can be added to a pool?

Why must an unmanaged desktop be registered with View Connection Server before it can be added to a pool? 

A. The View Composer will not be able to create linked clones in the pool.
B. The desktop must be known to vCenter Server to be seen by the Connection Server.
C. The View Connection Server must remotely install View Agent before adding the desktop to the pool.
D. The View Connection Server must know the FQDN or IP address of the desktop before it can add it as a source.






Answer: D

A system administrator creates a new pool of desktops using linked clones. The linked clones fail to deploy properly, and View Administrator displays the error message: Provisioning error occurred on Pool Desktop_ID because of a resource problem What are two likely causes of the problem? (Choose two.)

A system administrator creates a new pool of desktops using linked clones. The linked clones fail to deploy properly, and View Administrator displays the error message:
Provisioning error occurred on Pool Desktop_ID because of a resource problem
What are two likely causes of the problem? (Choose two.) 

A. The Composer service on the vCenter Server is not working.
B. The View Administrator user account does not have permission to access the datastore of the pool.
C. The View Agent is not installed on the parent VM of the linked clone desktop.
D. The datastore used for the pool is out of disk space.






Answer: B,D

A View administrator is unable to create a desktop pool in View Administrator. Which three settings should the View administrator verify to diagnose the problem? (Choose three.)

A View administrator is unable to create a desktop pool in View Administrator.
Which three settings should the View administrator verify to diagnose the problem? (Choose three.) 

A. The account has sufficient permissions to access the objects in an ESXi cluster.
B. The account has sufficient permissions to create a pool.
C. The template does not have snapshots.
D. The account has sufficient permissions to access the templates.
E. The account has sufficient permissions for the datastore.







Answer: A,B,D

Provisioning operations for a pool are unusually sluggish, and an error message in the event database displays: Provisioning error occurred on Pool Call-Center because of a timeout while customizing Which three actions would resolve the timeouts? (Choose three.)

Provisioning operations for a pool are unusually sluggish, and an error message in the event database displays:
Provisioning error occurred on Pool Call-Center because of a timeout while customizing
Which three actions would resolve the timeouts? (Choose three.) 

A. Add datastores to the pool.
B. Configure additional vCenter Servers.
C. Reduce the provisioning and power operation limits for vCenter Server.
D. Reduce the number of concurrent operations that are allowed for vCenter Server.
E. Increase the CPU and memory allocation for the vCenter Server resource pool.






Answer: B,C,D

An administrator has configured the View Event Database using Microsoft SQL Server for the database. The environment has three Connection Servers. When viewing Events in View Administrator some expected data is not displayed. Which two steps would help resolve the problem? (Choose two.)

An administrator has configured the View Event Database using Microsoft SQL Server for the database. The environment has three Connection Servers. When viewing Events in View Administrator some expected data is not displayed.
Which two steps would help resolve the problem? (Choose two.) 

A. Click the Refresh button in the right corner of the Events view to see new entries since page load.
B. Connect to View Administrator on the appropriate Connection Server to view the Events for that specific server.
C. Check the options under the Filter dropdown in the Event viewer to see if the desired data is being filtered out.
D. Click the Restart Database Service button in the View Administrator Event Database Configuration to refresh the connection to the database.






Answer: A,C

After performing several actions in View Administrator, an administrator wants to review the events log to verify one of the actions. However, no events are recorded, and no error messages are displayed. Which three steps should the administrator take to diagnose the problem? (Choose three.)

After performing several actions in View Administrator, an administrator wants to review the events log to verify one of the actions. However, no events are recorded, and no error messages are displayed.
Which three steps should the administrator take to diagnose the problem? (Choose three.) 

A. Verify that the event database was properly configured in View Administrator.
B. Verify that the port to access the database server is open.
C. Verify that the TC Server service has started.
D. Verify that the VMware View Events service is running on the View Connection Server.
E. Verify that the username that is used to connect to the database server has permission to write to the database.







Answer: A,B,E

Which configuration option must be provided to the wizard when creating Automated Pools with Full Virtual Machines?

Which configuration option must be provided to the wizard when creating Automated Pools with Full Virtual Machines? 

A. Active Directory domain
B. Default image
C. Redirect Windows profile to persistent disks
D. User assignment type





Answer: D

During installation of View Composer on an existing vCenter server, the following error is displayed: Error 28014. Unable to close the firewall What are two solutions for this issue? (Choose two.)

During installation of View Composer on an existing vCenter server, the following error is displayed:
Error 28014. Unable to close the firewall
What are two solutions for this issue? (Choose two.) 

A. The View Composer installer should be restarted with the Run as Administrator option on the context menu.
B. Enable the firewall before restarting the installation.
C. The firewall is active processing other network traffic on the vCenter Server system. The install should be restarted after stopping the vCenter services.
D. A third-party firewall tool is being used on the system running vCenter Server and View Composer. Firewall changes must be made manually before restarting the installation.







Answer: A,B

A View administrator is updating a desktop source that has been in use for full clone desktops. The administrator now wishes to use the desktop for linked clones. Which two steps are required to make this change? (Choose two.)

A View administrator is updating a desktop source that has been in use for full clone desktops. The administrator now wishes to use the desktop for linked clones.
Which two steps are required to make this change? (Choose two.) 

A. Create a template from the virtual machine.
B. Enable View Composer Agent.
C. Reinstall the View Agent on the desktop.
D. Take a snapshot of the virtual machine.







Answer: B,D

A View administrator has just upgraded his View 5.0 infrastructure to vSphere 5.0. Which two components must be reinstalled on a desktop source prior to redeployment? (Choose two.)

A View administrator has just upgraded his View 5.0 infrastructure to vSphere 5.0. Which two components must be reinstalled on a desktop source prior to redeployment? (Choose two.) 

A. VMware Tools
B. VMware View Agent
C. VMware View PCoIP agent
D. VMware View View Agent with Persona Management setup option







Answer: A,B

An administrator is preparing a new desktop source for a linked clone pool. What are the two minimum software packages that must be installed? (Choose two.)

An administrator is preparing a new desktop source for a linked clone pool. What are the two minimum software packages that must be installed? (Choose two.)

A. VMware Tools
B. VMware View Agent
C. VMware View PCoIP agent
D. VMware View View Agent with Persona Management setup option






Answer: A,B

Which three services should be disabled to optimize performance on a linked clone desktop? (Choose three.)

Which three services should be disabled to optimize performance on a linked clone desktop? (Choose three.) 

A. Windows Update Service
B. Windows System Restore
C. Windows User Profile Service
D. Windows Diagnostic Policy Service
E. Windows Driver Foundation Service





Answer: A,B,D

An administrator needs to deploy a VMware View solution that will host several linked clone automated pools, a manual pool, and a Terminal Services pool. During the installation, the administrator determines that it is not possible to connect to desktops in the terminal services pool. What are two likely causes of the problem? (Choose two.)

An administrator needs to deploy a VMware View solution that will host several linked clone automated pools, a manual pool, and a Terminal Services pool. During the installation, the administrator determines that it is not possible to connect to desktops in the terminal services pool.
What are two likely causes of the problem? (Choose two.) 

A. The View Agent is not installed in the Terminal Services desktop source.
B. End users are attempting to connect to the desktops using the View Client for Mac.
C. RDP has been blocked in the firewall for security purposes.
D. PCoIP has been blocked in the firewall for security purposes.






Answer: A,C

A desktop administrator needs to create a Windows XP desktop source for a pool of desktops and ensure that the desktop source exhibits optimal performance. Which two actions will optimize performance of the desktop source? (Choose two.)

A desktop administrator needs to create a Windows XP desktop source for a pool of desktops and ensure that the desktop source exhibits optimal performance.
Which two actions will optimize performance of the desktop source? (Choose two.) 

A. Disable indexing service.
B. Disable paging of the guest OS.
C. Select Adjust for Best Appearance.
D. Disable hardware acceleration.






Answer: A,B

Which two settings apply to Manual Unmanaged Pools with Floating Assignment? (Choose two.)

Which two settings apply to Manual Unmanaged Pools with Floating Assignment? (Choose two.) 

A. Persistent Disk migration
B. Allow users to reset desktop
C. Connection Server restrictions
D. Automatic logoff after disconnect








Answer: C,D

Which type of pool uses the least amount of storage?

Which type of pool uses the least amount of storage? 

A. An automated pool that contains full virtual machines with thin-provisioning enabled
B. A manual pool
C. A linked clone automated pool with thin-provisioning enabled
D. A linked clone automated pool







Answer: D

When creating an Automated Pool with Full Clones, which two settings require Floating Assignment? (Choose two.)

When creating an Automated Pool with Full Clones, which two settings require Floating Assignment? (Choose two.) 

A. Delete desktop after logoff
B. Remote desktop power policy
C. Allow multiple sessions per user
D. Allow users to reset their desktops







Answer: A,C

An administrator must create a pool for a group of developers. The developer group is still growing, and additional developers will be hired over the coming months. The developers use a standard system configuration and a common set of tools. From time to time they also need to install unique applications required by the projects that they are working on. Which two configuration options should the administrator use when configuring this pool? (Choose two.)

An administrator must create a pool for a group of developers. The developer group is still growing, and additional developers will be hired over the coming months. The developers use a standard system configuration and a common set of tools. From time to time they also need to install unique applications required by the projects that they are working on.
Which two configuration options should the administrator use when configuring this pool? (Choose two.) 

A. Create 4GB persistent disks to store the application software.
B. Select Redirect Windows profile to persistent disk.
C. Select an automated pool to use a template.
D. Create a dedicated-assignment pool.







Answer: C,D